Mini-Carrier

The Mini-Carrier is an agile, payload optimized trailer in central-axle design for settling container in accordance with DIN 30720 / 30720-1. It is specifically designed for the site assembly and the disposal area for urban short-haul operations. The Mini-Carrier is a payload giant, which quickly attached and with a low fuel overhead with-rolls. The Mini-Carrier has space in a parking space, so that the driver can make the change of container traffic in dense urban area quickly.
City-Concept for settling container vehicles
Hüffermann designed demountable complete trains that are perfect for use at narrow loading points perfect - in the city center, at the hospital waste disposal, construction sites or sewage treatment plants. The trailer is designed for front load. The user saves the maneuvering for rear loading.
Your benefits:
- Front load
- little maneuvering space
- time saving handling
Combined Load securing
Through a combined load securing the skips are mounted on the Mini-Carrier. The skips are secured against slipping in the direction of travel and laterally by adjustable stops. To the rear the container is locked by inclined lashing at the receiving piston. It is lashed with 2 tension chains, which secured a special, self-locking oval eyelet at the rear container receiving flask and the lashing angle of 35 ° - 60 ° can be lashed down. A shortening clutch facilitates handling.
Safety-Fix
Safety-Fix is a time saving securing system. It is based on both sides mounted ratchet tensioners. After connecting the chain, the driver pulls the container with their help to the attacks. Only one chain per vehicle side, he must then tighten the lashing angle of 35 to 60 degrees in order to secure the container in a form-fitting direction.
Chainless Load securing
Positionier-Fix
This positioning device up to 12 cubic meters of large settling container can be transported safely. It is perfectly centered and horizontally adjustable mounted on the trailer. For locking uses the chainless operating system one of the bearings on the skip. According to DIN 30720-1 such bearing are prescribed front and rear for new settling container. Thanks to positioning Fix the driver also saves up to 90% time during loading and unloading, without the risk of catching your fingers.
Load securing Zentrier-Fix
The centering of its guide sleeve pull and position by turning to the desired container width. By elastic force, the centering slides into the desired centering position. Due to the 8-times adjustable also centering positions outside the container standard widths can be adjusted and meet the prescribed by the legislature maximum side clearance.
Your benefits:
- Easy Handling
- Robust Technology
- Various container widths
Mini-Carrier Variants